Previous item Alzheimers - Replacing the... Next item SV40 Virus Frequencies

Energy Balancing by Numbers

Healing occurs when there is a shift between the harmonious and disharmonious energies in the body. To make that shift, you need a way to dialogue with your energetic field.

All organisms, including you, communicate by vibrational energy.  Your cells will use this vibrational energy first before using the chemical communication system of your body.

Manipulating this vibrational energy is much more efficient than giving chemicals to the body.

In Energy Balancing by Numbers, Lloyd Mear provides the source codes for this vibrational energy in the form of numerical sequences. These numerical sequences hold a charge, an intention, and they activate specific frequencies that should be present in a healthy body. They bring the body back online.

A colleague looking for a simple way to use frequencies recently asked me if Lloyd Mear’s frequencies worked. I tested them out and sure enough, they work simply by speaking the numbers. So anyone can do this using their own body as the frequency transmitter.

Even more interesting, as I started to us frequency hardware to transmit the frequencies, the colleague pointed out that the spoken energy numbers are not the same as Rife frequencies. To get the equivalent Rife frequency, you need to raise the spoken frequency to the power of 1/PHI. PHI is the golden mean = 1.618033 and the power of PHI is an interesting study in and of itself.

So let’s take an example. This morning I got up and took out the three page check list that comes with Lloyd’s book. Using muscle testing or my Cameron Aurameter, I found the second page of the checklist was where to look. Scanning page two, the item “Lungs – Strong L R” stood out. Specifically, my left lung was not as energized as it could be. The check list pointed to page 54 in Energy Balancing by NumbersThe first number on page 54 “Lungs 48683857365” tested positive. I then tested the application of the number by the spoken word and found it needed to be tuned up (common when working with frequencies) and the best number is 48683868365. Most of Lloyd’s frequencies work straight out of the book without tuning. I had to speak this number 10-15 times to get the desired effect which was a noticeable change in lung function and significant change in energy of the left lung.

This number can be turned into a frequency that I can transmit using an F165/Harmony Chip/DMI/SG1 combination by raising it to the power of 1/PHI.

48683868365 ^ (1/1.618033) = 4028758.792

This allows you to create frequency sets for remote balancing or imprinting on water. Even more amazing, you can take any Rife frequency and turn it into an effective spoken number by raising it to the awesome power of PHI. Let’s say you had an original Rife frequency of 12832676.

12832676 ^ 1.618033 = 317315912654.52 is the power of the spoken word.

One of my business partners (may he rest in peace) always said the ultimate frequency transmitter is the human body. Here you have it in a way anyone can use it!


  • Lynn Posted March 4, 2018 6:24 pm

    Does the book have specific frequencies for vitamins and minerals?

  • Jeff Sutherland Posted April 3, 2018 4:59 pm

    Yes, the book has sections on vitamins and minerals.

  • Dennis Jones Posted July 16, 2019 12:25 am

    I am a doctor practicing in Liberia to end this problem of bacterial infection and I’ve been trying to get Lloyd Mears phone number I have sent two emails my email address is or my cell phone is 609-941-2113 or you can call me at area code 215 856 7461

    • Jeff Sutherland Posted July 17, 2019 8:26 am

      You will have to visit the Energy Balancing website as I do not have his phone number.

  • Sergio González Posted October 29, 2019 12:28 pm

    Hola, las frecuencias se pueden preparar con un aparato radiónico y dar como medicamento homeopático ?? Van directas o correctivas ?

    • Jeff Sutherland Posted October 29, 2019 1:47 pm

      Yes, the frequencies can be prepared as a homeopathic medicine. They will directly kill pathogens.

      • Sergio González Posted October 29, 2019 6:47 pm

        Hola, las frecuencias se pueden preparar con un aparato radiónico y dar como medicamento homeopático ?? Van directas o correctivas ?

  • Sergio González Posted October 29, 2019 6:47 pm

    Muchas gracias

  • Dan Jenson Posted June 15, 2020 10:48 am

    Is this divination ?

    • Jeff Sutherland Posted June 17, 2020 10:55 am

      Energy Balancing by Numbers is based on dowsing and the frequencies work. Our researchers have figured out how to translate them to run on frequency generators so they can be automated.

  • Delphine Posted October 26, 2020 10:25 pm

    Is there a number for painful callouses under the feet

    • Jeff Sutherland Posted October 27, 2020 7:23 am

      You would need to check with Loyd Mear or his book for that.

      • Tony Posted August 8, 2021 1:32 am

        You say if you take any rife frequency and raise it to the power PHI, you get the power of the spoken words. In your example “317315912654.52”, there’s a decimal point. How do you read a number with a decimal point?

        • Jeff Sutherland Posted August 8, 2021 4:23 pm

          The numbers in the book are all whole numbers. These work spoken but cannot be transmitted by a frequency generator. Experimentation has shown that by dividing by 1/phi repeatedly to get a small enough number to run on a frequency generator, the transmitted frequencies will work, perhaps not at well as the spoken word.

  • Tony Posted August 8, 2021 8:36 pm

    Okay, but what if I wanted to take a regular rife frequency and translate it to the spoken words. How am I supposed to read it when they all have decimal points? For example: take the spoken number 317315912654.52. How do I speak that with a decimal point inside it? Would it be like this, “three-one-seven-three-one-five-nine-one-two-six-five-four-POINT-five-two”?

    • Jeff Sutherland Posted August 9, 2021 2:53 pm

      Translated Rife frequencies to spoken word is a research project. Haven’t done this.

  • Sergio Gonzalez Posted January 25, 2022 6:51 pm

    Ustedes tienen o venden algun aparato para fabricar las frecuencias ??

    • Jeff Sutherland Posted May 21, 2022 11:06 am

      Contact us if interested in frequency devices. We are authorized resellers of some devices and work through business partners for other devices.

  • Jeff Sutherland Posted January 27, 2022 4:06 pm

    We use F100 and Spooky2 devices to generate frequencies. We use SG2 and ABPAs as frequency transmitters. It is our policy, at least currently, to not make any of our own devices, but make our frequencies work on any device.

Add Your Comment

Your email address will not be published. Required fields are marked *