Frequency Research Lab Setup  – SG1, SG2, DMI, SG8 Amp, Harmony Evolution Chip Next item ABPA - Frequency...

Frequency Research Lab Setup – SG1, SG2, DMI, SG8 Amp, Harmony Evolution Chip

Update: The SG1 has now been upgraded to SG2 which is 10-100 times more powerful. Longevity Research sells the SG2 and has some of my old SG1s that still work great for less money. Contact Carol at
For SG2 users, you must position the DMI in the photo in the center of the SG2 instead of in the upper quadrant for an SG1.
Researchers, test your systems!

The standard Frequency Research Lab setup for delivery of remote frequencies is based on two decades of frequency research with leading inventors in the field. It is easily affordable for computer users and includes:

1. Computer – PC or Mac
2. F165 frequency generator
3. SG1 or SG2 transmitter
4. DMI board for digital photos
5. Harmony Evolution Chip to create more effective frequencies

The photo above shows a DMI board properly placed on an SG1 transmitter. Our lab systems have SG8 amplifiers so that we can run up to 8 SG1s with one F165 frequency generator.

The PDF in the link below shows exactly how to place a DMI on top of an SG1. Geometry is critical. Our labs use velcro tape to attach the DMI to the SG1 so that it can easily be adjusted to the optimal angle. The wrong angle or positioning will result in reduced or no effective frequency transmission!

For maximum power output the SG1 input port must be pointed towards magnetic north.

The PDF also shows how to insert a Harmony Evolution Chip under the DMI for maximum response. Some trolls on the internet have complained that the Harmony Chip is useless. I make no claims for the Harmony Chip except to state that my testing shows my lab setup is about 10 times as effective as a lab without the chip.

Do your own testing!

If you have an SG8 amp, you can power up to 8 SG1s from a single frequency generator. In this case, you need only one Harmony Chip placed on the SG8 to affect up to 8 SG1 transmissions.

If you need assistance with equipment or setup up contact and we will connect you with Longevity Research, LLC. They sell all our equipment. Frequency Research Foundation does not sell any equipment, only frequency data for use with recommended equipment. This allows us to be impartial about what equipment to use. We are only interested in what works the best given currently available hardware.

Click here for PDF on how to setup your lab properly…


  • Ann-Marie Storey Posted November 22, 2020 2:11 am

    I believe the SG1 was developed by Carols late husband, I bought one from her. I’m wondering if you developed this new one? I miss you Dr. Sutherland, you helped me greatly when I was struggling the most. I’m much better after taking high dose iodine for many months. I’m still battling mites but only internally and not quite as bad, the mites in my scalp and brain are pretty much gone. Hope you are well, have a happy Thanksgiving!

    • Jeff Sutherland Posted November 22, 2020 9:27 am

      The SG1 was developed under the guidance of Dale Fawcett by a retired senior scientist from one of the leading government weapons labs. He was tasked with building a scalar generator, as every electromagnetic wave has a scalar component that transmits independent of distance. The challenge was getting most of the energy into the scalar component and minimizing the electrical component.

      He did a great job and Carol Fawcett with her medical intuitive capabilities tuned the SG1 to be even better.

      One of my fellow researchers pointed out that putting a strong magnet on top of the SG1 made it even more powerful. I experimented with this until I had a solution that was about 25 times more powerful. I then gave the design to Carol Fawcett and she had her manufacturing people figure out how to put a small extra powerful extra magnet inside the SG1 box to implement my design.

      • Trent Alvarez Posted May 14, 2021 1:19 am

        What do you think of Spooky remote? I know you said you use the best hardware available but I was curious what you think about spooky remote, if it works or is any good?

        • Jeff Sutherland Posted May 16, 2021 3:08 pm

          I have tried Spooky remote and the latest version works well but not as effective as my standard lab setup.

          • Trent Alvarez Posted May 21, 2021 9:55 pm

            Thank You! Where can people buy an SG2 transmitter? I followed a link on another page but it took me to a site called

Add Your Comment

Your email address will not be published. Required fields are marked *